BLTLB - METAL CUTTING OIL, 67951
- MSDS: BLTLB
- Manufacturer: KAR PRODUCTS DISTRIBUTOR
- Product Name: METAL CUTTING OIL, 67951
- National Stock Number: 9150-00N021820
Product Identification
Product ID:METAL CUTTING OIL, 67951
MSDS Date:06/29/1988
FSC:9150
NIIN:00N021820
MSDS Number: BLTLB
Responsible Party
DES PLAINES, IL 60016
US
Emergency Phone: 708-296-6111
Info Phone: 708-296-6111
Cage: DO397
Contractor
Telephone: 708-296-6111
Cage: DO397
Ingredients
PETROLEUM HYDROCARBON MIXTURE. PEL/TLV AS OIL MIST.
Fraction By Weight: 88%
OSHA PEL 5 MG/M3 (MFR)
ACGIH TLV: 5 MG/M3 (MFR)
PROPANE
CAS: 74-98-6
RTECS: TX2275000
Fraction By Weight: 12%
OSHA PEL 1000 PPM
ACGIH TLV: ASPHYXIANT
PROPANE, 2-METHYL; (ISOBUTANE)
CAS: 75-28-5
RTECS: TZ4300000
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:TARGET ORGANS OF INDIVIDUAL CHEMICALS:
CENTRAL NERVOUS SYSTEM. LONG TERM EXPOSURE (YEARS) TO VAPOR MAY
CAUSE LUNG, LIVER OR KIDNEY DAMAGE.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:DIZZINESS, DISORIENTATION, EXCITATION,
FROSTBITE.
Medical Cond Aggravated by Exposure:HEART DISEASE, RESPIRATORY
DISORDERS.
First Aid
First Aid:EYE:IMMED WASH W/LARGE AMTS OF WATER FOR AT LEAST 15 MIN,
OCCSNLY LIFTING LIDS. GET MD IMMED. SKIN:IMMED FLUSH CONTAMD SKIN
W/WATER. IF CLTHG PENETRATED, REMOVE & FLUSH W/WATER. GET MD IMMED.
INHAL:RE MOVE TO FRESH AIR & GIVE ARTF RESP IF BRTHG STOPPED. KEEP
WARM & QUIET. GET MD IMMED. INGEST:GET MD IMMEDIATELY.
Fire Fighting
Flash Point Method:TCC
Flash Point:-40F,-40C
Lower Limits:1.8%
Upper Limits:12%
Extinguishing Media:WATER FOG, DRY CHEMICAL OR CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:HEATED CANS MAY BURST.
Accidental Release
Spill Release Procedures:USE ABSORBENT SWEEPING COMPOUND TO SOAK UP
MATERIAL. PUT INTO CONTAINER. DISPOSE OF AS HAZARDOUS WASTE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE AT TEMPERATURES BELOW 120F.
Other Precautions:CONTACT LENSES SHOULD NOT BE WORN WHEN WORKING WITH
CHEMICALS.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED SCBA REQUIRED FOR
CONCENTRATIONS ABOVE TLV LIMITS.
Ventilation:LOCAL EXHAUST.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR APPROP EQUIP TO PVNT SKIN FROM
FREEZING. IMMED REMOVE ANY CLTHG THAT BECOMES WET TO AVOID
FLAMMABILITY HAZARD.
Work Hygienic Practices:USE AS DIRECTED ON PRODUCT LABEL. PRACTICE GOOD
HABITS OF CLEANLINESS.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:V3
Vapor Pres:40PSIG@70F
Vapor Density:4
Spec Gravity:0.8
Evaporation Rate & Reference:<0.1 (BUTYL ACETATE = 1).
Solubility in Water:NIL
Appearance and Odor:DARK BROWN/LIGHT PETROLEUM ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:HIGH TEMPERATURES, HEAT, SPARKS OR OPEN
FLAME.
Hazardous Decomposition Products:IN FIRE WILL DECOMPOSE TO CO2 AND
WATER.
Disposal
Waste Disposal Methods:DISPOSE OF AS HAZARDOUS WASTE I/A/W LOCAL, STATE
AND FEDERAL REGULATIONS (EPA/RCRA).
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.